Hydro jetting in the Portland metro

Request a callback

When a drain keeps clogging no matter how often it's snaked, the problem is usually what's stuck to the pipe wall, not a single plug in the middle. Snaking punches a hole through the blockage; it doesn't clean the inside of the line. Hydro jetting does. A jetter sends high-pressure water backward through a hose tip, scouring the full diameter of the pipe and flushing the debris out.

When jetting beats snaking

• Grease-heavy kitchen lines in restaurants and busy homes, where soap and fat coat the pipe
• Root intrusion in clay laterals, where a cable only cuts an opening and leaves the rest
• Repeat clogs that come back within weeks of a snaking
• Heavy buildup the camera shows as a narrowed, coated line

Why the camera comes first

Jetting uses enough pressure to damage a weak pipe, so the honest sequence is to scope the line before jetting it. A camera reveals cracks, offsets, or a collapsed section where jetting would make things worse, and confirms the job is safe to do. A plumber who wants to jet without looking is skipping a step.

How it fits with the rest

Jetting cleans a line; it doesn't fix a broken one. If the camera shows structural damage under the debris, the next conversation is about lining or replacement, not another cleaning. Where the pipe is sound, jetting plus a camera check is often the end of the problem.

What it costs

Jetting is typically priced above a standard drain clearing because of the equipment and time, and below a repair. The pro who calls you back will scope the line and quote it honestly.